Incon Lighting’s 305 Series Wet Location Wall Sconce is a reasonably priced, simple, & durable solution for residential, commercial, & industrial outdoor, high traffic applications

It is available in a variety of colors, wattages, & bulb types.

Incon Lighting’s 304 Series Wet Location Wall Sconce is a reasonably priced, simple, & durable solution for residential, commercial, & industrial outdoor, high traffic applications

It is available in a variety of colors, wattages, & bulb types.

Incon Lighting’s 898 Series Outdoor Pathway Light Bollard is a simple and elegant choice for placement along sidewalks, driveways, or to designate the borders of an outside sitting area like a patio or along a pool side.

It is available in a variety of colors, wattages, & bulb types.

Our product numbers reflect all of these options from left to right. For example a 1431564Z50KPL is a 143 Series Linear Ceiling Fixture with a white lens, black finish with 2 32 Watt F32T8 Philips Lighting Linear Fluorescent Tube Light Bulbs with a 5000K Full Spectrum Color Temperature.

This includes the following wattages:

• 13 – (1) 13W GX23 (i)
• 26 – (2) 13W GX23 (i)
• 39 – (3) 13W GX23 (i)
• 52 – (4) 13W GX23 (i)

Please contact us if you have questions or would like to have one of our fixtures built with this wattage option as if you wait, it might not be available.

Our Induction 872 series has a superior lumen maintenance and a 100,00 hour life. The energy saving and lower labor costs make induction the ideal lighting solution for almost any area and security application.

The 872 is available up to 55 watts, which provides excellent color rendering, instant starting capabilities and better lumen maintenance then the 175 watt metal halide system.

For more information on the 872 series, please email us at sales@inconlighting.com or contact your nearest Incon Lighting representative.

Our Induction 875 series has a superior lumen maintenance and a 100,00 hour life. The energy saving and lower labor costs make induction the ideal lighting solution for almost any area and security application.

The 875 is available up to 165 watts, which provides excellent color rendering, instant starting capabilities and better lumen maintenance then the 320 watt metal halide system.

For more information on the 875 series, please email us at sales@inconlighting.com or contact your nearest Incon Lighting representative.

1. It is very important to make sure that the power is shut off at the breaker or the breaker is removed. Connect black power wires using a UL approved wire connector (not supplied with most fixtures) You can get them in a pack for very cheap at places like home depot, lowes, and radio shack. You will need 3 of them for this task.
2. Connect white neutral wires using a UL approved wire connector.
3. Connect green ground wires using a UL approved wire connector.
4. Tuck all wires into the lamp post (or pole)
5. Finger tighten set screws (this model has 3) to center the base onto the post.
6. Finish tightening with a hand held manual screw driver. This one uses Philip’s head screws (+) Do NOT use a power drill as it will strip the screws and base.
7. At this point you can install your light bulb to the post top fitter’s socket base. This one is a medium E26 screw base on a high pressure sodium (HPS) HID (High Intensity Discharge) light bulb. Be sure to screw it snug, but not to hard.
8. Once light bulb is in you can place your globe over the base. To get both clamps under the lip of the globe you will need to tilt the globe to one side to get the first clamp under, then move towards the opposite site and the other clamp will pop under with a push from your finger. They have springs under them to assist in this as well as keeping space vertically for easier installation.
9. Once globe is on you will need to screw the clamps down underneath the base again with a Philip’s head screw driver (+) and NOT a power drill as it will strip the screws and base.

If you would like to purchase this post top street lamp it is available from Incon Lighting.